• 1064nm Short Nanosecond Pulse Fiber Laser Module for LIDAR and 3D Scanning

    1064nm Short Nanosecond Pulse Fiber Laser Module for LIDAR and 3D Scanning

    1064nm Short Nanosecond Pulse Fiber Laser for LIDAR and 3D Scanning   Techwin 1064nm pulse fiber laser for LiIDAR is a high peak power, high pulse energy laser source. Using MOPA configuration and all- fiber optimized design offer the high peak power and near diffraction-limited quality output beam. Techwin 1064nm pulse fiber laser for LiDAR is ideal sources for LiDAR applications of 3D scanning, telemetry and range finding.   Techwin 1064nm pulse fiber laser for LiDAR employs mo...
  • MHz/GHz 1.0µm Narrow Linewidth  Single Frequency Fiber Laser

    MHz/GHz 1.0µm Narrow Linewidth Single Frequency Fiber Laser

    MHz/GHz 1.0µm Narrow Linewidth Single Frequency Fiber Laser Based on a master oscillator power amplifier (MOPA) design, the narrow linewidth fiber laser is a single frequency laser which has seed laser of MHz level. Optimally designed LiNbO3 phase modulator allows spectral broadening, the linewidth of output laser is at GHz level, it is possible to modulate the linewidth by means of radio frequency (RF) signal. The low noise fiber amplifier is used to extend the output power. This fiber la...
  • 1.0µm Single Mode CW Lasers

    1.0µm Single Mode CW Lasers

    1.0µm Single Mode CW Lasers The 1.0µm single mode CW fiber lasers are highly integrated continuous Ytterbium-doped fiber laser system. Integrated design of all-fiber structure along with double cladding fiber pumping technology realizes high performance laser output, the output power reaches 100W, and simultaneously achieves near diffraction-limited beam quality. The 1.0µm high power CW fiber lasers adopts control system based on microprocessor, featuring stable performance, long service l...
  • 1.0µm Ytterbium-Doped Pulsed Fiber Laser (ps/fs)

    1.0µm Ytterbium-Doped Pulsed Fiber Laser (ps/fs)

    1.0µm Ytterbium-Doped Pulsed Fiber Laser (ps/fs) Based on all-fiber structure design, ytterbium-doped pulsed fiber laser is a SESAM passively mode-locked all-polarization-maintaining fiber laser. The optimally designed optical path achieves stable linear polarization picosecond laser output, which is featured by high stability and maintenance-free operation. This mode-locked fiber laser is suitable for scientific research tasks or used as seed laser for high power industrial ultrafast puls...
  • 1.0µm Nanosecond Fiber Laser

    1.0µm Nanosecond Fiber Laser

    1.0µm Nanosecond Fiber Laser The 1064nm nanosecond pulsed fiber laser is integrated with high power distributed feedback (DFB) or Fabry–Perot (FP) semiconductor laser. Utilizing pulse drive circuit and direct modulation realizes high peak power output with short pulse at ns level. The minimum pulse width is down to 0.5ns, the peak power is up to 1W, and the maximum repetition rate can excess 3MHz. The both ranges of pulse width and repetition rate are selectable. It is an ideal seed source...
  • kHz 1.0µm Narrow Linewidth Single Frequency Fiber Laser

    kHz 1.0µm Narrow Linewidth Single Frequency Fiber Laser

    kHz 1.0µm Narrow Linewidth Single Frequency Fiber Laser The CKSF-R single frequency fiber laser is a kind of ultra-low noise lasers with narrow linewidth in the low kilohertz range which is below 1 kHz. These narrow-linewidth lasers deliver ultra-low phase noise and relative intensity noise, and the side-mode suppression ratio (SMSR) is over 55dB. Besides, high-intensity package is adopted to allow that the fiber laser is applicable to various environments, ensuring stable single longitudi...